Technical Data
Press force
120 kN (available from 150 strokes/min)
Stroke rate
stepless up to 600 strokes/min
Distance between table and ram (with clamping plate), largest stroke at the bottom, adjustment at the top
215 mm (max.)
Ram adjustment
40 mm
Ram stroke adjustable
8 - 40 mm
Ram surface (L x W)
225 x 140 mm
Drilled hole in the ram
Ø 32 x 60 mm
Fitting groove in the ram
16 H7 mm
Table surface (L x W)
370 x 440 mm
Mould dimensions (L x W)
330 x 340 mm
Clamping plate thickness
50 mm
Through-hole in the clamping plate (L x W)
240 x 120 mm
Through-hole in the table (L x W)
300/240 mm x 160 mm
Belt infeed above clamping surface
feed-dependent
Drive power
5,5 kW
Weight (without feed)
1800 kg
Dimensions (L x W x H)
940 x 740 x 1.900 mm
Technical changes reserved.
Structure
- Press body in stable double-column monoblock design made of vibration-damping gray cast iron
- Eccentric shaft on roller bearings with adjustment stroke and rotating mass balance
- Air-cooled piston rod, mounted on the eccentric shaft with multi-row, heavy-duty caged roller bearing
- Press ram made of high-strength titanium alloyed cast Al, 4-fold backlash-free roller bearings on hardened and ground guideways
- Press drive via frequency-controlled three-phase motor, flywheel and pneumatic clutch-brake combination
- Press sequence control in PLC technology
- Press control with cam controller, mould and press force monitoring
- Special/additional equipment possible at any time by technical arrangement
- The SEP 12 stamping press can be individually equipped with gripper or roller feeds pushing or pulling
- In the high-speed version, speeds of up to 800 strokes/min are also possible
Dimensions
* Belt infeed height above clamping surface on request (feed-dependent)
** Mould installation height (see table)
*** The lateral passage on the press body is reduced to 160 mm when a gripper feed is used (special widths on request)
Ram Surface
Mould mounting surface
Ram stroke in mm
Mould installation height min.-max.
Permissible stroke rate depending on ram stroke
8
191-231
600
13
188-288
550
20
185-225
500
28
181-221
450
34
178-216
400
38
176-216
400
40
175-215
350
mechanically adjustable
Installation height in mm for bottom ram stroke (BDC)
with maximum mould upper part weight of 40 kg
Download PDF here:
